Journal · 2026-04-27
How Much Does a Custom Suit Cost in Toronto?
If you're shopping for a custom suit in Toronto or the GTA in 2026, expect to pay anywhere from $1,495 to $6,000+. The spread is wide for good reason — the word "custom" covers everything from a basic made-to-measure jacket cut from a stock pattern to a fully bespoke garment hand-drafted from twenty-two body measurements. Here is what the numbers actually look like, and what you are paying for at each level.
The three price tiers, plainly
Made-to-measure ($800 – $1,400). A standard pattern is adjusted to your measurements by software or a sales associate. Construction is fused, cut overseas, finished locally. Fits better than off-the-rack but the silhouette is not yours alone.
Semi-bespoke ($1,495 – $3,000). A pattern is built specifically for your body, often with a half-canvas or full-canvas chest, hand-padded lapels, working buttonholes, and a real fitting in person. This is where most serious GTA tailors sit, including the entry tier at Peter Parvez.
Full bespoke ($3,500 – $6,000+). Cut from a paper pattern by hand, basted, fitted, taken apart, re-cut, fitted again. Ten to fifteen hours of needlework. Cloth from Loro Piana, Vitale Barberis, Holland & Sherry. The price reflects time, not branding.
What actually drives the cost
Cloth
The single biggest variable. A Super 110s wool is a different garment than a Super 150s with cashmere. Italian and English mills (Loro Piana, Zegna, Holland & Sherry) sit at the top of the ladder. Cloth alone can range from $200 to $1,500 per suit length.
Construction
Fused suits use glue to bond the chest piece. Half-canvas uses a sewn horsehair canvas in the upper chest. Full canvas runs the length of the jacket front, hand-stitched. Full canvas drapes better, lasts decades, and costs more in labour.
Hand work
Hand-padded lapels, hand-pick stitching along the edges, hand-finished buttonholes, hand-attached collar — every hour of needlework adds dollars. A fully hand-finished jacket has fifteen-plus hours of skilled labour in it.
Number of fittings
One fitting is made-to-measure. Two to three fittings is semi-bespoke. Three or more — including a basted try-on where the suit is held together with white thread — is bespoke.
The Toronto and Mississauga market in 2026
Downtown King Street West has the highest sticker prices in the GTA. Mississauga and Square One run roughly 15–25% lower for comparable construction because the rent and operating costs are lower — not because the work is. At Peter Parvez at Square One, two-piece suits start at $1,495 CAD and three-piece suits at $1,795, with full-canvas Loro Piana commissions topping out around $4,200.
How to spot value
- Ask to see the canvas. A reputable tailor will pinch the lapel and show you whether it floats (canvas) or feels stiff and flat (fused).
- Ask how many fittings are included. One fitting is not bespoke, no matter what the website says.
- Ask where the cloth is from. A real tailor names the mill and shows you the swatch book. Vague answers are a flag.
- Ask who cuts the pattern. If the answer is "the system" or "head office," it is made-to-measure, not bespoke.
Is it worth it?
A $1,500 semi-bespoke suit, worn weekly, costs about $5 per wear over five years. A $400 fast-fashion suit re-bought every eighteen months runs the same — without the fit, the cloth, or the longevity. Custom is not always the cheapest thing on the rack; it is almost always the cheapest thing in the closet.
Book a measurement
If you want to see the difference in person, book a fitting at the Mississauga atelier. Peter cuts every pattern himself, no deposit to start, and the consultation is free.
Written by Peter Parvez · Master tailor, Mississauga · Book a fitting · More articles